DIAMOND FLOWER INC.

MIO-600VL

  Data bus:                32-bit, VL-bus

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Two IDE (AT) Interface drives

  Floppy drives            Two 360KB, 720KB, 1.2MB, or 1.44MB drives
  supported:

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      J1

  34-pin control cable connector - floppy drive           J2

  15-pin game port - internal                             J3

  10-pin serial port (COM1/2/4) - internal                J4

  10-pin serial port (COM1/2/3) - external                J5

  25-pin parallel port (LPT1/2/3) - external              J6

  4-pin connector - Drive active LED                      J7

                     SERIAL PORT CONFIGURATION JUMPERS

            JP1 - SERIAL PORT 1 (J5) : JP2 - SERIAL PORT 2 (J4)

  [Image]

  »   Port is DTE (Data Terminal            pins 1 & 2, 3 & 4, 5 & 6, 7 &
      Equipment)                                  8, 9 & 10 closed

      Port is DCE (Data Comm. Equipment)    pins 1 & 3, 2 & 4, 5 & 7, 6 &
                                                  8, 9 & 10 closed

                             HARD DRIVE SPEED

         Function               JP3/jumper 1            JP3/jumper 2

  »      Slow (600ns)         pins 1 & 2 closed       pins 1 & 2 closed

        Medium (383ns)        pins 2 & 3 closed       pins 1 & 2 closed

         Fast (240ns)         pins 2 & 3 closed       pins 2 & 3 closed

                         SERIAL PORT SIGNAL STATUS

            JP4 - SERIAL PORT 2 (J4) : JP5 - SERIAL PORT 1 (J5)

              Function                    Location            Setting

  »   DCD (Data Carrier Detect) -         Jumper 1           pins 1 & 2
      NORMAL                                                  closed

      DCD (Data Carrier Detect) -         Jumper 1           pins 2 & 3
      FORCED TRUE                                             closed

  »   DSR (Data Set Ready) - NORMAL       Jumper 2           pins 1 & 2
                                                              closed

      DSR (Data Set Ready) - FORCED       Jumper 2           pins 2 & 3
      TRUE                                                    closed

  »   CTS (Clear To Send) - NORMAL        Jumper 3           pins 1 & 2
                                                              closed

      CTS (Clear To Send) - FORCED        Jumper 3           pins 2 & 3
      TRUE                                                    closed

                     SERIAL PORTS 1 (J5) CONFIGURATION

         Function               JP6/jumper 1            JP6/jumper 2

  »          COM1             pins 1 & 2 closed       pins 1 & 2 closed

             COM2             pins 2 & 3 closed       pins 1 & 2 closed

             COM3             pins 1 & 2 closed       pins 2 & 3 closed

           Disabled           pins 2 & 3 closed       pins 2 & 3 closed

                     SERIAL PORTS 2 (J4) CONFIGURATION

         Function               JP6/jumper 3            JP6/jumper 4

  »          COM2             pins 1 & 2 closed       pins 1 & 2 closed

             COM1             pins 2 & 3 closed       pins 1 & 2 closed

             COM4             pins 1 & 2 closed       pins 2 & 3 closed

           Disabled           pins 2 & 3 closed       pins 2 & 3 closed

                     PARALLEL PORT (J6) CONFIGURATION

             LPT                  JP6/jumper 5           JP5/jumper 6

         LPT1 (3BC-3BEh)       pins 1 & 2 closed      pins 2 & 3 closed

  »      LPT2 (378-37Ah)       pins 2 & 3 closed      pins 1 & 2 closed

         LPT3 (278-27Ah)       pins 1 & 2 closed      pins 1 & 2 closed

            Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Floppy drive enabled              JP6/jumper 7         pins 1 & 2
                                                              closed

      Floppy drive disabled             JP6/jumper 7         pins 2 & 3
                                                              closed

  »   Game Port (J3) enabled            JP6/jumper 9         pins 1 & 2
                                                              closed

      Game Port (J3) disabled           JP6/jumper 9         pins 2 & 3
                                                              closed

                   SERIAL PORT 1 (J5) INTERRUPT REQUEST

    IRQ      JP7/jumper 1    JP7/jumper 2    JP7/jumper 3    JP/jumper 4

       2        closed           open            open           open

       3         open            open            open          closed

  »    4         open            open           closed          open

       5         open           closed           open           open

                   SERIAL PORT 2 (J4) INTERRUPT REQUEST

    IRQ      JP7/jumper 5   JP7/jumper 6    JP7/jumper 7    JP7/jumper 8

       2        closed          open            open            open

  »    3         open           open            open           closed

       4         open           open           closed           open

       5         open          closed           open            open

                   PARALLEL PORT (J6) INTERRUPT REQUEST

         IRQ                 JP7/jumper 9              JP7/jumper 10

             5                   open                     closed

  »          7                  closed                     open